PVC and RPET Freezer Grade Films



HOP Industries introduces Freezer grade PVC and RPET films. These films are designed to perform in difficult frozen applications with temperatures as low as -40°C.  These materials are manufactured by blending special compounded additives to enhance their performance in sub-zero temperatures and resist cracking. Your thermoformed or printed products will now be able to withstand the harsh environment, maintain their strength, and retain their attractive appearance in cold storage units.



Freezer Grade PVC

This virgin grade product is available in our usual range of thicknesses from .008” through .040” with widths ranging from 1” through 60”. This material is formulated for thermoforming packages and covers to be used within freezers.  This material is also printable and often used for signage.
This material can be produced in clear or colors with minimum order quantities of 3,000 pounds


Freezer Grade RPET

This Recycled Polyethylene Terephthalate (RPET) is available in thicknesses from .008” through .032” with widths ranging from 1” through 60”. The film is blended with virgin grade PET resin and special additives to produce a film able to withstand temperatures as low as -40°C. This material is currently available in clear only.




(You can check our inventory by following this link)

Hop Industries Corporation

1251 Valley Brook Ave, Lyndhurst NJ 07071

Phone: 1-800-524-0757 / 201-438-6200   Fax: 201-438-5444